ACCESSORIES
RESOURCES
ELECTRICAL ACCESSORIES TIPS:
Replacing a Plug with Terminal Screws
In terminal screws the wires are attached to screws inside the plug body. To replace:
• Unscrew and remove the new plug's insulating barrier.
• Using a utility knife, split the end of the cord to separate the wires.
• Push the cord through the plug body.
• Make two loops with the wires.
• Pass the loose ends of the wires through the loops and pull tightly to form an Underwriter's knot (this prevents strain on the terminal screws.)
• Strip 1/2 to 3/4 inch of insulation off the wire ends being careful not to nick the wires.
• Unscrew the terminal screws on the barrier to allow space for the wires.
• Form loops on each wire and wrap the wires clockwise 3/4 way around the screws.
• Tighten the screws and trim the excess wire.
• Reattach the barrier.
