EVENT COMMAND 4 x 4 CONTROLLER
1. Power switch
Turns on or off the power
2. Flash/Latch buttons 1-4 & LEDs
Press to activate flash function, corresponding channel(s) will be momentarily turned on, release will turn off. Keep pressing these buttons will maintain the corresponding channel on regardless of the chase of programs. The second tap will deactivate latch.
3. Stand By & LED
Tap the button to kill the output of channel 1-4, its LED blinks. The second tap returns to normal mode and its LED goes out.
4. Sound & LED
Tap the button to activate SOUND mode, its LED is lit, the chase programs will be controlled by the music rhythms. Tap again to deactivate SOUND mode, its LED goes out.
5. Beat & LED
When Sound LED is lit, tap the button to activate BEAT mode, its LED is lit. When a music beat is picked up, the chase programs will execute one step and the channel LEDs will go out. When Sound LED is off, Beat mode is not available.
6. Full On & LED
Tap the button to maintain all channels full on, its LED is lit. The second tap deactivates this function and its LED goes out.
7. Program Display
Shows the current program.
8. Program Up
Press to select the program by increasing the program.
9. Program Down
Press to select the program by decreasing the program.
10. Speed Display
Shows the current speed from, 01 - 99.
11. Speed Up
Press to select the chase speed by increasing the speed.
12. Speed Down
Press to select the chase speed by decreasing the speed
13. Flash buttons 5-8 & LEDs
Keep pressing these buttons to momentarily turn the corresponding channel on, the corresponding LED is lit, release will deactivate this function.
14. Latch buttons 5-8 & LEDs
Tap the buttons to maintain the corresponding channel on regardless of the chase of programs, the
FEATURES
•8 channel output
•4 channel chaser with 17 chase programs
•4 latch/Flash buttons override the chase programs
•4 channel switch pack wit h Flash and Latch effects
•99 adjustable chase speeds
•Sound Chase/Beat Chase
•Stand by and Full on
•Power failure memory
