MS2000R
Since its introduction in 1978, the Korg MS series of synthesizers has caused a sensation by its sound, looks, and flexibility in sound creation. More than twenty years later, a new MS instrument has been created that also fuses the functionality of Korg's SQ10 analog sequencer and VC-10 vocoder. The MS2000R is a rack-mountable 5U module, and this new MS instrument simultaneously returns to the origin of synthesizers while opening a new universe of possibilities.
The tone generator of the MS2000R uses a DSP-powered analog modelling system. Acclaimed on the Korg Prophecy, Z1, and Electribe series, this system has been refined to produce an incredibly wide range of sounds. From sharply cutting to powerful and thick, all the awesome sonic power that can be produced only by DSP technology is packed into a compact keyboard or module. All major sound parameters are arranged on the front panel, allowing you the total freedom of manipulating knobs and switches in real time.
The oscillator section consists of two oscillators and a noise generator. Oscillator 1 lets you select from eight oscillator algorithms, including basic analog synthesizer waveforms such as sawtooth and pulse waves, to unique selections like VoxWave and 64 DWGS (Digital Waveform Generator System) waveforms first featured on the Korg DW-6000. Each waveform can be modified by applying a suitable type of WFM (Waveform Modulation) for an even wider timbral selection and movement.
Oscillator 2 lets you select from three types of waveforms. In addition to detuning Oscillator 2 relative to Oscillator 1, you can also use it to apply sync or ring modulation to generate complex sounds. The audio input jacks allow external sound sources to be used in the same way as the internal oscillators, and even processed by the internal filters, etc.
The EG (Envelope Generator) that applies time-variant change to sound parameters uses a familiar four-parameter ADSR (Attack, Decay, Sustain, Release) configuration. The LFO (Low Frequency Oscillator) used to apply cyclic change to sound parameters allows you to choose from four types of waveform. Two EGs and two LFOs are provided for each timbre.
Two types of low pass filter (12/24 dB), a band pass filter, and a high pass filter are provided, together with adjustable resonance.
The effect section section provides three types of modulation effect, three types of delay, and an equalizer. In addition to volume and pan controls, the amp section provides a Distortion on/off setting so that even soft sounds can be transformed into aggressive solo parts.
By connecting a mic to the AUDIO IN 1, 2 jacks the MS2000R can be used as a four-voice vocoder. In addition to using two 16-bank filter sets to simulate the vocoder sounds of classic equipment you can create original vocoder sounds of classic equipment you can create original vocoder sounds by shifting the filter frequency, or adjusting the level and pan of individual frequency bands.
A 'Virtual Patch' function simulates the patching capabilities of the legendary Korg PS series and MS series synthesizers. As well as EG and LFO, velocity or keyboard tracking can be used as modulation sources to effect parameters such as pitch, noise level, and pan.
The three-track Mod Sequence function applies time-variant change to sound parameters in a way similar to varying the control voltage on the analog synthesizers of the past. In addition to the 28 parameters on the front panel, you can apply time-variant change to the pitch or step length and adjust it in real time.
MS2000R SPECIFICATIONS:
• Sound Generation Method: Analog Modelling Synthesis System • Synthesizer Program: Multi Timbral = 2 (max Split/Dual Mode), Voices = 4 Voices, Sound source = 2 Oscillator + Noise Generator, EG x 2, LFO x 2, Virtual Patch x 4, MOD Sequence 16 steps (Max) x 3 • Vocoder Program: Voices = 4 Voices, Sound Source = 1 Oscillator +Noise Generator, EG x 2, LFO x 2, 16 Channels vocoder, level and pan of each channel can be edited, Format Shift function • Programs: 128 programs • Effects: Modulation effects (3 types), Delay (3 types), Equalizer • Arpeggiator: 6 types • Inputs: AUDIO IN 1, 2, LEVEL switch LINE/MIC, (AUDIO IN 1, 2 (LINE) Input impedance = 39 k-ohms, Maximum output level = -3.5 dBu (Audio In knob maximum), Input source impedance = 600 0hms • Outputs: L/MONO, R, Output Impledance = 1.1 k-ohms, Maximum = 550 ohms), Maximum output level = +6.5dBu, Load impedance = 100 k-ohms, Headphones, Output impedance = 10 ohms, Maximum output level = 35 mW, Load impedance = 33 ohms • Control Inputs: Assignable pedal, Assignable Switch • MIDI: IN, OUT, THRU • Display: 16 characters x 2 lines with backlight • Power Supply: DC 9V (AC adapter) • Power Consumption: 8W • Dimensions: 482.0 (W) X 233.2(D) X 87.1 (H)mm / 19.0”(W) x 9.2”(D) x 3.4”(H) 5U rack-mountable • Weight: 2.8kg / 6.2 lbs • Accessories: AC adapter (DC 9V, 600mA), Washers x 4, Bushings x 4, Screws x 4
|
