2 X 220W 7 Channel Powered Mixer
The Phonic Powerpod 740 Deluxe Powered Mixer features two separate 220 Watt amplifiers, which allow the user to configure the output in three different ways (either Main 1+Main 2, Main+Monitor, or Main only - Bridged operation, 400W). The 7 balanced microphone inputs (as well as a total of 10 line inputs) with rumble filters gives the Powerpod 740 Deluxe a high level of connectivity.
Features
* 220W + 220W / 4 ohms amplifier for main 1 & 2 or main / monitor (Bridge mono, 440W / 8 ohms)
* 24-bit digital stereo multi-effect processor with 16 programs plus foot switch
* Dual 7-band graphic equalizers with In/Out switches for main(stereo)/monitor or main L/R
* 7 balanced mic inputs through XLR jacks
* 10 line inputs through 1/4" jacks
* 2 Super Hi-Z inputs optimized for direct input of acoustic electric guitars and electric guitars or basses
* Rumbling filters for mic inputs
* Monitor and effect sends on each input channel
* +48V phantom power
* Record output with trim control for recording level matching
* Handy mini-stereo I/O for MD, MP3 player/recorder, input with level control
* Mains power switchable between 115VAC and 230VAC
SPECIFICATION
POWER AMP, output power in watts @THD<0.5%, 1KHz
Number of Power channels 2
Limiter 2
8 ohms per channel 145
4 ohms per channel 220
8 ohms bridge mono 440
Inputs
Lo-Z / Hi-Z channels 4, 2 with super Hi-Z (470K)
Balanced Mic/ Line-Level channels 3
2T input 1x Mini Stereo & 2x RCA
Aux returns 1 x 1/4" TS, Unbal.
Outputs
Main out 1x 1/4" TS, Unbal.
Monitor out 1 x 1/4" TS, Unbal.
AUX and Efx send 1 x 1/4" TS, Unbal.
REC out, A Pair, RCA & Mini Stereo
Speaker outputs 5 x 1/4" TS
Channel Strips 7
Monitor / Effect send controls 2
Volume Controls Rotary
Pad in/out CH 1~4
Master Section
Aux Returns 1, Mono
Effects Return to Monitor Yes
Faders Monitor, Main (Rotary)
Metering
Number of channels 2
Segments 5
Phantom Power Supply +48V DC
Switches Global
Digital Effect Processor 16 preset programs (24-bit) with foot switch (effect on/off)
Graphic EQ Stereo 2 x 7-band (assignable to main L/R)
Center Frequency 60, 120, 360, 1K, 2.5K, 7K, 16KHz
Range ±12 dB
Noise: 20Hz to 20KHz bandwidth, IHF-A weighted, line inputs to main L/R outputs, all channels assigned, panned
Master output, all fader down <-78 dBu
Power amp output, all fader down <-63 dBu
THD - Power output, 1KHz, 20Hz to 20KHz @125 watts, 4 ohms <0.5%
Any output, 1KHz @ +14dBu, 20Hz to20KHz, channel inputs <0.3%
CMRR (1 KHz @ -60dBu, Gain at maximum) 80 dB
Crosstalk (1KHz @ 0dBu, 20Hz to 20KHz bandwidth, channel in to main L/R outputs)
Channel fader down, other channels at <-63 dB
Channel muted, other channels at unity <-64 dB
Frequency Response (Mic input to 20Hz ~ 20KHz, line level o/p @ +4dBu into 600 ohms +0/-2 dB
20Hz ~ 20KHz, power amp o/p 1 watt into 8 ohms +0/-2 dB
Maximum Level
Mic preamp input +10 dBu
All other inputs +22 dBu
Unbalanced output +22 dBu
Lo-Z input (Mic in) 2.2K ohms
Hi-Z input (Line in) 5K ohms
Super Hi-Z (Line in) 470K ohms
All other input (except insert) >10K ohms
RCA 2T output 1.2K ohms
All other outputs 560 ohms
Equalization 3-band, ±15 dB 3-band,
Low EQ 80 Hz
Mid EQ 2.5KHz
Hi EQ 12 KHz
Rumble filter 75Hz, 18dB/oct
Foot switch Digital effect mute: ON/OFF
Microphone Preamp E.I.N., 150 ohms terminated, max gain <-122 dBm
Power Consumption (Average) 250 Watts
Power Requirement Switchable between 115 VAC and 230 VAC, 50/60 Hz
|
