PLX1104
550+550W @ 4 OHMS AMPLIFIER
The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offers a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.
The PLX2 Series
 Introduction
The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems.
Two ways to get PLX2 performance
The "02" models (PLX1802, PLX2502, PLX3102 and PLX3602) are the right choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. These models feature built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
The compact "04" models (PLX1104, PLX1804) bring the same performance and technology, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg) these "plug-and-play" amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback.
Mechanical
PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability.
Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet.
PowerLight Technology
PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs. / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second, the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean.
Audio Quality
PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality.
Features
- Very light weight ("02" models, 21 lbs/9.5 kg, "04" models 13 lbs/5.9 kg).
- Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged.
- Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. 02 models also feature bridge and parallel mode LED indicators.
- Speakon® NL-4 output connectors provide a positive-locking speaker connection. Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers.
- 21-position front-panel gain controls for precise, repeatable amplifier adjustment.
- Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation.
- Patented PowerLight power supply technology with other patents pending.
- Value combined with uncompromised PLX technology, quality and performance for applications that don't require bridged or 2 ohm stereo operation.
- Two models with power ratings up to 900 watts per channel @ 4 ohms.
- Clip limiting protects speakers; thermal limiting maintains operation even during abnormal overloads.
 FOH Magazine's Mark Amundson reviews the PLX2 in the July 2006 issue. Read the Review (PDF)
 VIDEO DOWNLOAD
NAMM 2006 Launch Video
(9.08mb)
PLX1104 SPECIFICATIONS
SPECIFICATIONS |
Stereo Mode
8 ohms (each channel)
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD |
310 W
325 W |
Stereo Mode
4 ohms (each channel)
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD |
500 W
550 W |
| Signal to Noise (20 Hz - 20 kHz) |
-106 dB |
| Input Sensitivity @ 8 ohms |
1.18 Vrms |
| Gain @ 8 ohms |
32.5 dB |
| Output Circuitry |
AB |
| Distortion (SMPTE-IM) |
Less than 0.02% |
Typical Distortion
1/8 rated power, 20 Hz-20 kHz
Full rated power, 20 Hz-20 kHz |
Less than 0.02%
Less than 0.02% |
| Frequency Response |
20 Hz-20 kHz, -0.5 dB |
| Damping Factor |
Greater than 200 |
| Input Impedance |
20k ohms balanced
10k ohms unbalanced |
| Input Clipping |
5.5 Vrms (+15 dBu) |
| Cooling |
Variable-speed fan, rear-to-front air flow |
| Input Connectors, each channel |
3-pin XLR and 1/4" TRS balanced |
| Output Connectors, each channel |
Neutrik® NL4 Speakon®
(Both channels available on Ch 1 output) |
| Rear Panel Switches |
Circuit Breaker |
| Front Panel Controls |
Detented Input Attenuator: 0 to ∞ dB
Power On/Off |
| Front Panel Indicators |
Clip: Red LED
-10: Green LED
Signal (-35 dB): Green LED
Power: Blue LED |
PROTECTION
|
| Amplifier Protection |
Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loads |
| Load Protection |
On/off muting, DC-fault power supply shutdown |
| Infrasonic |
-3 dB, 8 Hz |
| DC fault |
Power supply shutdown |
| Ultrasonic |
-3 dB, 120 kHz |
| Short Circuit |
Muting |
| Thermal |
Limiting at 85° C, Muting at 90° C |
| Over Current |
Active clip limiting
AC circuit breaker |
| High Line |
Standard +15%, survive +25% |
| Low Line |
-40% |
PHYSICAL |
Dimensions
Height
Width
Depth, Rack mounting surface to rear panel
Overall Depth |
3.5" (8.9 cm) 2 rack spaces
19" (48.3 cm)
8.95" (22.7 cm)
11" (27.9 cm)
|
| Weight |
13 lbs. (5.9 kg) net
18 lbs. (8.2 kg) shipping |
| Agency Approvals |
CE, FCC, cUL, UL |
| * CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN-61000 AC harmonic limits |
CURRENT CONSUMPTION |
| 1/8 Power (pink noise) |
8 ohms
4 ohms |
5A/120V
8A / 120V |
| 1/3 Power (pink noise) |
8 ohms
4 ohms |
8A/120V
12.4A / 120V |
| Full Power |
8 ohms
4 ohms |
12.6A/120V
21A / 120V |
| Notes |
Long term, breaker-limited to 15A/120V |
| All Specification Subject to Change Without Notice. |
|
