4 INPUTS,
120 + 120W STEREO MIXER AMP
Designed to provide control and amplification in stereo, low impedance,
background music and public address situations the PA200 Series II provides
a microphone input suitable for any impedance microphone either balanced
or unbalanced line, with adjustable voice override 'MUTE'
control and three 'AUXILIARY' inputs suitable for tape, CD,
or video. The PA200 Series II has a volume control for each input and
separate bass and treble controls as well as individual control of 2 zones,
if used with 'mono' input signals for adjustable left/right
balance if used in stereo. The PA200 series II's built in 120W +
120W MOS-FET amplifiers provide ample power for most background music
situations and carry open/short circuit and loudspeaker (DC) protection
and 'clip' and 'normal' running indicators.
TECHNICAL SPECIFICATION
Rated output power...........20W RMS into 4W @ 0.05% THD
Amplifier output...............120W RMS into 4W per channel
.......................................90W RMS into 8W per channel
.......................................50W RMS into 16W per channel
Frequency response...........20Hz to 20kHz
Total harmonic distortion...0.1% 20Hz to 20kHz at 100W to 4W
Protection........................Open and short circuit protected
......................................DC fault crow-bar protection
Mic.input.........................3mV (-48dBm) into 10W
......................................balanced/unbalanced
Aux. inputs......................100mV (-18dBm) into 10W
Pre-Amp input.................Tape: 775mV (OdBm) @ 1kW
......................................Slave: 775mV (OdBm) @ 1kW
Tone networks..................+ 12 dB
Power requirements...........230V AC 50/60Hz 225VA
Dimensions......................483mm x 89mm(2U) x 279mm
Weight............................6.8kg
|
|
