L.U.C.A.S IMPACT 1200W COMPLETE POWERED SPEAKER SYSTEM
The Sound Sensation
Looking for something special in sound reinforcement? Do you wish to pamper your audience with unprecedented audio quality? Then opt for L.U.C.A.S IMPACT. It offers everything that has made L.U.C.A.S the solution of choice for small to medium-sized venues: compact components, fabulous handling ease and big, bold sound at every volume level. What’s more, this newest generation sports leading-edge neodymium speakers and digital power amps. With L.U.C.A.S IMPACT, higher performance at a lower weight and smaller footprint is a reality.
L.U.C.A.S IMPACT is endowed with the new DDO™ Controller, which dramatically improves upon the predecessor’s already amazing performance.
The patent-applied-for DDO™ technology is powered by an extremely potent 56-bit DSP engineered to effectively compensate errors in speakers’ response and adjust the signal perfectly to human hearing at every volume. All this adds up to sound that is full and crystal clear at all levels. Rest assured, you’ve never heard your instrument like this before. In fact, go ahead and strike the word distortion from your vocabulary—you won’t need it any longer.
L.U.C.A.S IMPACT—a new experience in sound quality!
FACTS & FEATURES
-
HK Audio DDO™ System Controller with 5 presets
-
Two satellites outfitted with 8" neodymium speaker and 1" CD horn
-
700-watt RMS digital power amp powers the 15“ neodymium subwoofer.
-
2x 250-watt RMS digital power amps to drive the satellites.
-
HK Audio MonoTilt™ for optimum sound-to-audience alignment
-
15" subwoofer in an enclosure factory-equipped with casters
-
Total weight of the system: 47 kg/ 103 lbs
for fuller descriptions of these features see Active Systems Techonology below
Satellites
Power-handling nominal 250 W RMS
Frequency response +/- 3dB *** 130 Hz-19 kHz
Axial sensitivity 1W * 103 dB
Maximum SPL @1m * 125 dB@10% THD
Nominal impedance 8 ohms
Connections 1x Speakon® NL 4
Midrange woofer 1x 8" Neodymium
Tweeter/driver 1"
Directivity 60° x 40° CD horn
Crossover frequency 2,2 kHz, 12 dB/octave
HF protection (passive) Dyn. protection circuit
Pole mount MonoTilt™, 36 mm
Dimensions (WxHxD) 26 cm x 38,5 cm x 28,5 cm, 10-1/4" x 15-1/8" x 11-1/4"
Weight 7,5 kg/ 16,5 lbs.
Subwoofer
Frequency response +/- 3dB *** 45 Hz - 130 Hz
Axial sensitivity 1W@1m * 101 dB
Maximum SPL @1m * 128 dB@10% THD
Subwoofer amplifier 1x 700 W RMS / Class D
Sat & Mid/High Unit amp 2x 250 W RMS / Class D
Active protective circuits DDO™ controller, Multiband limiter
Connections 2x XLR In combination jack, 2x XLR Through, 2x Speakon® Satellite out
Subwoofer 1x 15"
Pole mount M20 threaded base plate
Dimensions (WxHxD) 47,5 cm x 47 cm x 58,5 cm, 18-3/4" x 18-1/2" x 23"
Weight 32 kg/ 74,4 lbs.
Control Features
Also available:
The L.U.C.A.S IMPACT 1200W Powered Speaker System (Speakers only)
The L.U.C.A.S Add-On Package (Speaker Stands, bag & cables)
The L.U.C.A.S IMPACT Protective Covers
HK Adjustable Mounting Pole
HK Twin Fork Mount
HK AUDIO
Over the course of the last twenty five years, the name HK AUDIO® has become synonymous in Europe with live sound reinforcement systems of unrivaled quality. Made in Germany, these systems are the product of a lifelong passion and pursuit of a vision – the aspiration to deliver the perfect sound.
Company founders (and brothers) Hans and Lothar Stamer began producing their own loudspeaker cabinets in 1979 in a small shop in southwestern Germany. While the production space may have been small, their aspirations were not. Soon, the reputation of their products for craftsmanship and performance spread, prompting them to expand operations time and time again. Along the way, they served as Original Equipment Manufacturer to some of the most revered international names in pro audio. Over time, they developed and manufactured professional touring systems for larger and larger venues, including audiences of 100,000 and more.
Today, systems manufactured in their world-class facilities in St. Wendel, Germany, are called into service for an extremely broad range of applications. Thanks to the efforts of a highly skilled and dedicated team of more than 200 people, HK Audio® has firmly established itself as one of the most distinguished names in professional sound reinforcement in Europe.
ACTIVE SYSTEMS TECHNOLOGY™
HK AUDIO systems are all-inclusive sound reinforcement solutions comprising subwoofers, mid/high-range enclosures and
integrated electronics. Every system was developed from the ground up for a specific application and perfected for that purpose.
Though all aspects of system design are important, none is as crucial as selecting and matching components. The sonic magic to which we aspire requires components that do more than merely function together – they must act in concert, harmonising to
create systems greater than the sum of their parts.
These are tall orders, indeed. To fill them all, HK AUDIO engineers developed many new features and technologies. These features
are then handpicked and fine-tuned to suit each system. And by gearing every system to satisfy the requirements of specific sonic scenarios, we ensure that it delivers the best possible results for its intended application.
Digital Dynamics Optimization™
Active Compensation of Dynamic Distortion
Every speaker has a specific tonal character. Like an instrument, a speaker's timbre is not static—it varies as volume levels vary. A speaker also generates distortion, partial oscillations and resonances. In a nutshell, its response is constantly changing. And in a system comprising several speakers, these undesirable effects can be multiplied. This is where the new patent-applied-for DDO™ (Digital Dynamics Optimization) technology comes into play. The resulting sound is strikingly clear and natural. Furthermore, it is stable and easily controlled from a whisper to a roar.
DynaClip™ Limiter
for the bass power amp
HK AUDIO DynaClip™ technology is a dynamic limiter developed specifically
to enhance low-end performance. The DynaClip™ Limiter compensates for
the subwoofer's slower initial transient response, audibly improving pulse
behaviour. This makes the most of low-frequency energy, and enhanced
efficiency translates to more power.
Opto Limiter
for the mid/high-range
Mid/high-range frequencies are a breed apart from low-end frequencies, and they
require a different type of signal processing. To this end, we use a technology
originally developed for high-end recording. Its soft attack ensures smoother, more
musical limiting that sounds inconspicuous, even pleasant. The original signal
envelope remains largely intact, yielding a more dynamic and natural-sounding
response.
MultiBand Limiting
Optimized for every frequency range
Several limiters are synchronised to process all key frequency ranges. This achieves balanced dynamic response and punchy projection for highly musical sound across the entire frequency spectrum.
OFR™
Optimized Frequency Response Technology
An unprecedented technology, OFR™ delivers commanding yet well-balanced
sound at every level. It compensates for speaker components’ non-linear
frequency response and adapts the system’s sound to human auditory response.
Subsonic Filter
Protection against Low-Frequency rumble
The integrated subsonic filter suppresses accidental and unintentional signals such as footfalls, wind, or the sound of a hand accidentally brushing a microphone.
It cuts these frequencies drastically, freeing energy to better render bass impulses. Goodbye squashed dynamics and artificial sound, hello authenticity and natural sounding high/mid range response.
Digital Amping
Enhanced Efficiency and Dynamics
With an efficiency rating topping the 90% mark, digital power amps are smaller, lighter, and more compact than conventional amps.
The reduced thermal load on components clearly enhances reliability. The slew rate is far faster and the attenuation factor is higher, resulting in perceptibily
more responsive and accurate performance.
Easy Setup and Handling
Less Pre-Gig Stress
All HK AUDIO® Active Systems are designed as a cohesive unit consisting of
perfectly matched components. Painstaking effort is invested to ensure easy
transportion and swift set up. Handling and EQing couldn’t be easier, with no complicated and time-consuming tweaking challenges to master.
DuoTilt™, MicroTilt™& MonoTilt™
Making the Most of Sonic Energy
DuoTilt™, MicroTilt™ and MonoTilt™ pole mounts allow sound energy to be utilised far more efficiently. The DuoTilt™ offers angles of 7.5° and 15°, and MicroTilt™ and MonoTilt™ 10°, to better aim the mid/high-range cabinets directly at the audience. Troublesome ceiling reflections are minimised; the soundscape is clearer, tighter and more focused.
